Boeing 737 NG to be inspected after structural cracks found
The Federal Aviation Administration (FAA) asked operators of certain Boeing 737 NGs to conduct safety inspections after structural cracks were reported by the manufacturer. Boeing notified the agency after cracks were discovered during modifications on a “heavily used aircraft”. Subsequent inspections uncovered similar cracks in a small number of additional planes.
According to KOMO News, the concerned part was the pickle fork of a Boeing 737NG that logged 35,000 flight cycles, about half of the service lifespan for this aircraft. The pickle fork is the part that connects the fuselage with the wings, and manages stress and torque loading that bends the structure during operation. A complete failure of this structural component could have devastating consequences for the aircraft. The pickle forks are designed to last 90,000 life cycles – the whole service life of a Boeing 737NG.
BREAKING: Cracks found in critical part (called a pickle fork) that keeps wing attached to 737-NG (not MAX) fuselage. One found earlier in month, now more on other planes. Found early in plane's lifespan. Boe & FAA scrambling to find extent of problem. @KOMONewsradio #KOMONews pic.twitter.com/iRT4luL5FW— Charlie Harger (@KOMOCharlie) September 27, 2019
So far, cracks were found on “three Boeing 737-800s having more than 36,000 flight cycles,” an official of the Indian Directorate General of Civil Aviation (DGCA) told the Times of India. Boeing intends to inspect all Boeing NGs (737-600, 737-700, 737-800, and 737-900) above 26,000 flight cycles. It said it would work with its customers to “implement a recommended inspection plan for certain airplanes in the fleet”.
Similarly, an airworthiness directive is expected from the FAA for October 1, 2019, which will give operators instructions to conduct specific inspections, make any necessary repairs and report their findings to the agency. It is unclear for now how many aircraft are concerned by those inspections. In total, over 7,000 Boeing 737 NGs have been ordered worldwide, and more than 6,000 of these aircraft are currently in service.
This is yet another problem for Boeing. While currently facing strong criticism regarding its Boeing 737 MAX, its manufacturing practices are also under scrutiny regarding the KC-46 Pegasus and at least one of its Boeing 787 Dreamliner.
Tackling the challenges of labor shortages in MRO industries
For the aviation MRO industry adopting new practices and new technologies has always been high on the list of priorities...
Rolls-Royce starts building UltraFan, world’s largest jet engine
Rolls-Royce started building the UltraFan, the largest aircraft jet engine in the world. ...
Jet MS becomes dealer of ALTO Aviation’s premium cabin solutions
Jet MS, a global provider of base and line maintenance services for business and regional aircraft, and a part of the gl...