Airbus introduces first 3D-printed part in a cabin
When an airline updates its aircraft cabin layout, gaps are often created between the existing and new components. Such gaps need to be bridged before the aircraft can take on passengers, and time always is of the essence in returning a jetliner to revenue-generating service.
The traditional method of manufacturing a new plastic part involves creating custom-made injection moulding tooling – a process that is relatively complex, especially given the specialised nature of many components and the limited number needed for a typical cabin retrofit. By using 3D printing technology, Airbus has enabled small-batch manufacturing that is not only quicker than conventional moulding techniques but less expensive, too.
Where traditional production methods struggle, 3D printing shines
Not only are 3D-printed parts as strong as those made with traditional moulding methods, they can be made lighter in weight; an important consideration for jetliner interiors, where every kilogram counts. While 3D-printed parts have been integrated into Airbus aircraft in the past, the results were not deemed aesthetically pleasing enough to be used where they could be seen by passengers – until now.
Through a partnership with the Belgium-based Materialise company, Airbus now has the first 3D-printed parts seamlessly integrated into the cabins of its jetliners. These parts – spacer panels that fill end-gaps in a row of overhead storage compartments – have passed Airbus’ stringent cabin trim and quality standards and will soon be visible to passengers aboard Finnair’s A320 aircraft, whose cabin layout has been updated.
By using 3D printing, Airbus was able to create bio-inspired panels 15 percent lighter than if made using conventional production methods. This technology also enables the creation of complex internal support structures, such as lattices inside the panels, without imposing additional manufacturing costs.
Airbus A400M gained certification for Automatic Low Level Flight
The new generation airlifter Airbus A400M achieved Automatic Low Level Flight certification, which is a significant mile...
“Hibernating” Norwegian doubles losses in Q1
Unsurprisingly, the long-haul low-cost airline, Norwegian, posted a net loss in Q1 2020. The airline, which is currently...
No option of bankruptcy for American Airlines, CEO says
Speaking at a conference on May 27, 2020, Doug Parker, CEO of American Airlines, shared his views on a perspective for t...
Investigators find missing PIA PK8303 black box
The investigators working on the downed Pakistan International Airlines (PIA) A320 crash site found the missing black bo...
AFKLMP Cargo re-establishes route to Accra, Ghana
Operating from its two main hubs in Paris Charles de Gaulle and Amsterdam Airport Schipol, Air France KLM Martinair Carg...