Aviation Safety

FAA orders Boeing 737NG checks over loss-of-control risk

empty_airport_lounge_with_a_boeing_737ng_in_the_background.jpg

The US Federal Aviation Administration (FAA) has ordered repeated checks on certain Boeing 737 Next Generation aircraft after identifying a fault that could prevent an autothrottle safety system from responding to unequal engine thrust, potentially leading to a loss of control.

The airworthiness directive (AD) covers an estimated 300 US-registered aircraft. It is scheduled for publication on November 20, 2026, and takes effect 15 days later.

The problem involves missing or incorrect spoiler-position data used by the autothrottle’s cruise thrust split monitor. Without reliable data, the monitor could fail to activate, allowing a large difference in engine thrust to develop without the autothrottle disengaging.

That could cause the aircraft to roll unexpectedly. If pilots do not recognize and correct the condition promptly, they could lose control, the FAA said.

The agency bypassed the normal advance public-comment process, citing the safety risk. Operators must perform recurring built-in tests of the digital flight control system, correct failures and repeat testing until the system passes.

The directive, AD 2026-23-04, applies to specified 737-600, -700, -700C, -800 and -900 aircraft. It does not cover the 737 MAX.

The FAA addressed a similar concern on older 737 Classic aircraft in October 2022, when it ordered repeated tests on certain 737-300, -400 and -500 models.

In that directive, the agency said a failed spoiler sensor could go undetected by the autothrottle computer. A review found that maintenance testing was needed to identify failures involving the sensor input or its wiring.

The necessary test already appeared in the aircraft maintenance manual, but operators were not required to perform it repeatedly. The 2022 rule made recurring testing mandatory to prevent a failure from remaining undetected.

Leave a Reply

Your email address will not be published. Required fields are marked *