What is left of the Russian flying saucer? | EKIP Part 3
EKIP was a project to develop an aircraft with some wondrous properties: a saucer-like flying wing that would be more efficient than any contemporary airplane. After the collapse of the Soviet Union, a company created by chief engineer Lev Nikolayevich Schukin struggled to procure funds to develop the idea. After Schiukin’s death and several unsuccessful attempts to attract Western investors, the company disappeared.
Reportedly, in the late 90s and early 2000s, fields and swamps around Saratov became infested with flying saucers. People who went fishing or hiking there got so used to seeing unexplainable phenomena in the sky, nobody even considered such events as unusual.
At the same time, guests of Saratov aviation plant were gladly shown the cause of those legends: incredible inventions of the plant’s engineers. Suitcase-sized saucer-like vehicles that could take-off vertically, hover above the ground, accelerate and change direction almost instantaneously, and do all of that almost without a sound.
Supposedly, those were models of the EKIP. Nobody saw them performing such feats firsthand, but every journalist reported that somebody – other journalists, plant’s workers, potential investors – could not hide their excitement at what those vehicles could do.
In reality, as opposed to countless sensationalized descriptions in the contemporary press, EKIP aircraft were neither able of vertical take-off, nor could hover; they might have been test-flown several times in the mid-to-late 90s, but it is doubtful that tests happened beyond the premises of the factory. So, it is far more likely that Saratov’s UFO legends were inspired by actual extraterrestrial activity than the EKIP.
Besides local legends, the EKIP team was responsible for half-a-dozen models of various sizes, as well as several lines of concepts for prospective vehicles based on the idea. Cataloging all of them is a difficult, but fascinating task.
Of the physical artefacts left by the project, the most impressive are the scale models and prototypes that actually got constructed. The majority of them were intended for display or ground tests. At least a couple – the L1 and the L2 – flew. There was also a prototype of the EKIP-AULA L2-3 drone, one of the last products the EKIP Aviation Concern tried to sell. The drone may or may not have performed some tests, but its main use was to be photoshopped onto impressive vistas, supposedly flying over green forests and clean lakes of Russia.
It was not the one to which the whole name of the project was applied, though. In a lot of material on the development, a large metallic aircraft with a wingspan of 14.4 meters and a Russian coat of arms on its front is presented as the crowning achievement of engineer Schiukin. Most people referred to it simply as “the EKIP”, although it had an actual name – the L2-3.
It was intended as a prototype of an actual production variant, representing the smallest of passenger aircraft the concern planned to manufacture. The aircraft was planned to be remotely-controlled though, maybe due to safety concerns and maybe because the team thought it would be cheaper.
The EKIP L2-3 prototype (Image: EKIP Aviation Concern)
The work on it started in 1993. In several interviews, team members claimed that two L2-3s were actually under construction, one for ground tests and one capable of flying. Yet, later they got combined into one, with parts of the second prototype supposedly manufactured, but never seen in any of the promotional photos.
Those parts were produced by Schiukin’s old colleagues from the Energia bureau and shipped to Saratov for assembly. The near-finished L2-3 became a backdrop for many videos, photo-ops, and articles on the EKIP written in subsequent decades. It was constantly “several months” from being finished, although there are some claims that by 2003 the work on it had actually been complete. It was the same year the US Navy got interested in the project, and demonstrating the flight of the large prototype would have been the perfect thing the team could have done to receive funding. Nevertheless, the L2-3 never took off.
It had some sort of computerized control system installed, as well as supposedly working air cushion of a not-yet-tested kind. That cushion, as well as the boundary layer control system, was supposed to be powered by Pratt & Whitney Canada PW206 helicopter engine, while the main jets the aircraft would use for flight were a pair of PW 305A turbofans, the same ones that power the Bombardier Learjet 60 business jet. If the technical specification for the L2-3 is correct, the aircraft, equipped in such a way, would be quite overpowered.
It is difficult to tell if the engines installed on it were working or not. After the company went bankrupt and the team dispersed, the prototype was not disassembled for parts, like many others in Russia. It may indicate that it was well protected or that the parts mounted on it simply were not that valuable.
The EKIP L2-3 stood in the empty hangar of the Saratov aviation plant until its closure in 2011. Then, it was moved to a museum of village Ivanovskoe, near Moscow. Most likely, it stands there to this day, reminding of the shape that – many hoped – would eventually be seen in the skies above the country.
But actual production models of the EKIP would not have looked like that.
Downsizing the dream
Concepts of EKIP commercial vehicles went through several iterations, fluctuating in size as the project progressed. Names of the models were constantly recycled ‒ a decision that makes understanding the scope of the company's work rather difficult.
The first plan was conceived by 1991 and laid out in the first promotional video. Saying that the ambition was grand would be an understatement.
Three models were envisioned: the L-2, the L-3, and the L-4, with takeoff weights of 7, 110, and 600 tons, payload capacities of 2, 50, and 250 tons, and passenger capacities of 18, 500, and 2600 respectively. Yes, the largest EKIP was planned to be capable of carrying 2600 passengers.
A snapshot of a promotional video, likely made in 1991. Three models with their cargo and passenger capacities are listed. (Image: EKIP Aviation Concern)
For comparison, the Antonov An-225 Mriya has a maximum takeoff weight of 640 tons and holds a world record of carrying almost 190 tons of payload. The Airbus A380, the largest passenger aircraft in the world, usually carries no more than 575 people. It is difficult to say whether Schiukin’s team was taking the idea of building a 2600-seat airliner seriously, but before giving this development some thought, let’s briefly discuss what happened later.
By 1993, the team started talking of another selection of models: EKIP now had to come in five flavors, from 9-ton L2-3 to 600-ton L4-2. The latter had the same weight as 1991’s L-4, but now had a 128-meter wingspan (slightly larger than the current holder of the World record, the Scaled Composites Stratolaunch) and passenger capacity of 2000. Its cargo capacity dropped to “modest” 200 tons.
As far as it is possible to tell, this set of proposals was kept up until the early 2000s, with some insignificant updates. In either 2000 or 2001, the company presented their competitor to the Airbus A3XX (before it got its proper name – A380). The new model was named L3-2DM and seemingly was a middle ground between earlier L3-2 and L4-1 models, with passenger capacity of 656.
A couple of years later, most likely in 2002, information on the third set of models was published on one of the early iterations of the company's website. The L-4 and its variants were dropped, the L3-2 became the heaviest one, with the weight of 360 tons and passenger capacity of “only” 1200.
This last outlook of the possible EKIP family remained unchanged for the rest of the project's life. In several subsequent years, it was updated with a couple of new proposals, intended to reflect the change of times.
One of them was the EKIP-AULA L2-3, a 350-kilogram model, finished by already wavering company in 2003 and possibly tested on water. The team later described it as a prototype of a reconnaissance and patrol drone, probably intended to be equipped with cameras. Proposal for a heavier drone, simply named EKIP-2, was published a year later, with its passenger variant EKIP-2P capable of carrying 2 people.
So, in a span of several years, the team went from proposing airliners the size of a city, to surveillance drones barely able to lift several kilograms of equipment. Meanwhile, almost two decades after the project's death, it is not uncommon to see mentions that the EKIP is going to be a competitor to the Boeing 747, the Airbus A350, or whatever large aircraft is popular at the time. Sure, those proposals existed, but they were just a fraction of EKIP’s prospective development. And there are serious reasons to think that it was not a well-thought-out one.
If built, EKIP L3s and L4s would have been some of the largest aircraft ever constructed. Reportedly, some of them were supposed to have three decks, but most likely the team never went as far as modeling the aircraft beyond the basic shape.
Several scale models of 1993-version of the EKIP L3-1, with 80 red seats in a semi-transparent plastic fuselage, offer the only glimpse into how this type of vehicle could have looked. If Schukin or his colleagues ever made blueprints of other models, they are, most likely, lost.
Scale model of 1993 variant of EKIP L3-1 (Image: EKIP Aviation Concern)
It is not difficult to see some logic in their designs though, with clear divisions between regional, mid-sized, and intercontinental jets. It seems, dreaming big was the team's specialty, as every time after coming up with a new set of models, they could not help but include some ridiculously-sized ones.
The ones with the capacity of over 1000 passengers nowadays look nothing but absurd, but we have to remember that those were the early 90s. The Airbus A380 has just entered development and superjumbos seemed like the next big step in civilian aviation. In ex-Soviet countries, every major engineering bureau had plans to develop one, from the innovative Sukhoi KR-860 to the 1200-seat Tupolev Tu-404. The EKIP L-4 and L4-2 would have overshadowed all of them though.
How realistic were these proposals? If we discard the most ridiculous claims made by journalists and other enthusiasts at the time of aircraft’s development and look at numbers presented by the EKIP team at the very end of its existence, some of the data starts looking quite possible. The L3-1, as described in 2002, would supposedly be able to fly 4,000 kilometers on 14 tons of fuel while carrying 160 passengers. Similarly sized Embraer E195-E2 regional jet, while carrying up to 146 passengers, has a range of 4,900 kilometers and carries 13.7 tons of fuel. Payload capacity and weight of the EKIP L3-1 are also somewhat similar to the E195-E2.
Just for the fun of it, here is a comparison of the largest EKIP proposal (E4-2 from 1993) with some real aircraft. (Image: AeroTime News)
On the other hand, with capacities of their heaviest models, the EKIP team strayed straight into fantasy. In most cases they seemed to calculate the theoretical payload capacity of an aircraft and divide it by roughly 100 kilograms to get the passenger capacity. With smaller planes such a calculation is somewhat close to reality. With larger ones it does not work.
The Boeing 747-400 has a passenger capacity of 416, while the 747-400F freighter maximum payload capacity is less than 125 tons. The Airbus A380 can carry between 575 and 853 passengers depending on the configuration and its freighter version, while never built, was intended to carry no more than 150 tons.
If the formula EKIP’s engineers applied to their aircraft worked, the 747-400 and the A380 would be able to carry 1250 and 1500 passengers respectively, but that is not the case. Mainly because passenger cabins require seating, heating, toilets, entertainment systems, and other amenities without which people would not agree to enter the aircraft.
The weight adds up, especially on long-haul aircraft. The fact that Schukin’s team did not consider those requirements shows that they did not reach the phase of actually designing most of their proposed aircraft and presented numbers based purely on calculations. And even with those, the wondrous properties of their aircraft were somewhat on par with early-21st century jets.
But to have those properties – with the bulky fuselage, heavy air cushion system, and other features not present on sleek modern jets – the main requirement had to be met: the incredible increase in efficiency, provided by the boundary layer control system.
Its properties are yet another mystery we have to unravel. In fact, Schukin and his colleagues were not the first and not the last ones to research this concept – some aviation enthusiasts attempted to implement it several decades earlier, and in 2005, after the EKIP aviation concern practically ceased its existence, some European scientists began quite a monumental project to study the phenomenon.
[Continued in Part 4: Would the Russian flying saucer actually work?]
The story of a Soviet gun that kept destroying its own aircraft
GSh-6-30, the Soviet counterpart to the American GAU-8, was immensely powerful... As long as it did not blow up the airc...
Sixty years ago Yuri Gagarin became the first human in space
Exactly sixty years ago, the Soviet cosmonaut Yuri Gagarin made history by becoming the first human in space....
The special meaning behind Air France flights AF401 & AF229
Air France operated two celebratory flights AF401 and AF229 to make a nod to a special event in France’s aviation...